|
Toll Free: (877) 876-5247
or (510) 268-8117
Fixture Installation
Hanging Bars (Systems: L1172/74/75/76/79-# and Fixtures: L172/74/75/76/79)
Frosted Glass Mini Spot (Systems: L1172/74/75-#IP/IW and Fixtures: L17-IP/IW)
Mini Spot (Systems: L1174-5m-# and Fixtures: L17-YB)
Frosted Glass Mini Spot on 7"/14"/20" Bars (Systems: L1172/74/75-#IPb/IWb and Fixtures: L172/74/75-IP/IW)
Mini Spot on 7"/14"/20" Bars (Systems: L1172/74/75-#YBb and Fixtures: L172/74/75-YB)
#: Number of Light Fixtures
_______________________________________________________________________
Hanging Bars (Systems: L1174/75/76/79-# and Fixtures: L172/74/75/76/79)
-
Decide
where you want to position the light fixtures on the cables. For directional lighting, you need to stagger the connections so as to achieve the angles that you want.
-
Attach
the Bars onto the cables using the Connectors. Using the pointed screws in the Connectors to secure the fixture to the cables.
-
Install
the light bulbs and you are ready to power up!
Frosted Glass Mini Spot (Systems: L1174-#IP/IW and Fixtures: L17-IP/IW)
-
Decide
where you want to position the light fixtures on the cables
-
Detach the pointed nuts and insert the spanning cables into the slot/gap left opened with the removal of the nuts. Carefully screw the nuts back on so that the pointed nuts can penetrate the cable insulation in order to conduct low-voltage electricity.
-
Install
the light bulbs and you are ready to power up!
Mini Spot (Systems: L1174-5m-# and Fixtures: L17-YB)
-
Decide
where you want to position the light fixtures on the cables
-
Detach the pointed nuts and insert the spanning cables into the slot/gap left opened with the removal of the nuts. Carefully screw the nuts back on so that the pointed nuts can penetrate the cable insulation in order to conduct low-voltage electricity.
-
Install
the light bulbs and you are ready to power up!
Frosted Glass Mini Spot on 7"/14"/20" Bars (Systems: L1172/74/75-#IPb/IWb and Fixtures:
L172/74/75-IP/IW)
-
Decide where you want to position the light fixtures on the cables. For directional lighting, you need to stagger the connections so as to achieve the angles that you want.
-
Attach
the Bars onto the cables using the Connectors. Using the pointed screws in the Connectors to secure the Bars to the cables.
-
Unscrew the flat-head nuts on the fixture's two arms (fixtures come detached from the Bars)
-
Insert the Straight Bars into the slot/gap left opened with the removal of the nuts. The flat ends of the Straight Bars should be under the openings to provide secured support and to prevent the glass mini spots from accidental fall off.
-
Screw the flat-head nuts back on to tighten the fixture to the Straight Bars.
-
Install the light bulbs and you are ready to power up
Mini Spot on 7"/14"/20" Bars (Systems: L1172/74/75-#YBb and Fixtures: L172/74/75-YB)
-
Decide
where you want to position the light fixtures on the cables. For directional lighting, you need to stagger the connections so as to achieve the angles that you want.
-
Attach
the Bars onto the cables using the Connectors. Using the pointed screws in the Connectors to secure the Bars to the cables.
-
Unscrew the flat-head nuts on the fixture's arms
-
Insert the Straight Bars into the slot/gap left empty by the nuts. The flat ends of the Straight Bars should be under the openings to provide secured support and to prevent the glass mini spots from accidental fall off.
-
Screw the flat-head nuts back on to tighten the fixture to the Straight Bars.
-
Install the light bulbs and you are ready to power up
|
